Remote field / Eddy current
EEC-309 RFT/ECT
Portable instrument for heat-exchanger, condenser, boiler and small-diameter tubes, with ECT for non-ferromagnetic materials and RFT for ferromagnetic tubes.
The EEC-309 inspects heat-exchanger, condenser, boiler and small-diameter tubes. It combines ECT for non-ferromagnetic materials with RFT for ferromagnetic tubes, including carbon steel. Electromagnetic wall-loss assessment is based on signal response and calibration against known discontinuities; it is not equivalent to quantitative ultrasonic thickness measurement by IRIS.
Highlights
- —2 channels and 4 frequencies per channel
- —5 Hz–12 MHz range, with RFT from 5 Hz to 5 kHz
- —MIMO and OFDM technology to increase RFT inspection speed
- —Mixing unit to reduce support-plate signals
- —Tube Sheet Mapping with actual bundle layout and colour classification
- —Automatic report generation
- —2.7 kg and −20 °C to +55 °C operating range
Application industries
Related equipment
Smart instrument
EMS-2003C
Smart NDT instrument integrating Metal Magnetic Memory (MMM), Eddy Current Testing (ECT) and Remote Field Testing (RFT).
Advanced ultrasonics
EPA-101 Phased Array
Portable advanced ultrasonics system with PAUT, FMC, TFM, TOFD and conventional UT. Configurations 32:64, 32:128 and 64:128 PR.
MFL + ECT scanner
TANK-4000ME M2
Motorised tank floor scanner with 64 MFL channels + 32 ECT channels. Discriminates top-side and bottom-side corrosion in a single pass.